add arduino code

arduino/cybergaziniere.ino

@@ -0,0 +1,52 @@
+#include "WiFi.h"
+#include <OneWire.h>
+#include <DS18B20.h>
+#include <TM1637Display.h>
+
+//const char* ssid = "Antenne 5G";           
+//const char* password = "Un Truc Moins Chiant"; 
+const char* ssid = "Livebox-8DA0";           
+const char* password = "C3F3EE221002051A31382FFAF7"; 
+
+#define CLK 18
+#define DIO 5
+#define ONE_WIRE_BUS 4
+
+OneWire oneWire(ONE_WIRE_BUS);
+DS18B20 sensor(&oneWire);
+TM1637Display display(CLK, DIO);
+
+
+void setup() {
+   WiFi.begin(ssid, password);
+   
+  // put your setup code here, to run once:
+  Serial.begin(9600);
+  sensor.begin();
+  display.setBrightness(0);
+
+ Serial.print("Connecting");
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println();
+
+  Serial.print("Connected, IP address: ");
+  Serial.println(WiFi.localIP());
+}
+
+void loop() {
+  int temp = temperatureTrucs();
+  //Serial.println(temp);
+  display.showNumberDecEx(temp, 0x20);
+  
+  //;
+}
+
+int temperatureTrucs()
+{
+  sensor.requestTemperatures();
+  while (!sensor.isConversionComplete());  // wait until sensor is ready
+    return (int) (sensor.getTempC() * 10);
+}